• Adapts Automatically to 100-120 VAC, 200-240 VAC, 50/60 Hz.
 

The Compass Laminator is the latest in lamination technology. This 27" heated roller laminator is a good fit for schools and print shops alike. The heated silicon rollers provide a clear, uniform lamination using films up to 10 mil thick and allow for mounting and laminating materials up to 1/8" thick. This laminator is loaded with all-inclusive features that simplifies the most difficult laminating projects. The Compass is the result of decades of improvements on Ledco’s extremely durable and successful line of laminators.
 

New features on the Compass include:

• Automatic Temperature Control. Prevents the laminator from operating until the optimal laminating temperature has been reached.
• Graphic Keypad. Makes for easy operation by multiple users.
• Semi-Automatic Tension Adjustment. Provides for ideal laminating film tension without continuous adjustments resulting in flatter and clearer results.
• Easy Load System. Makes loading laminating film fast and easy preventing film mishaps when loading.
• Film Supply Monitor. Advises the user when the film supply is low to prevent wasting of materials and wrap arounds.
• Energy Saver Mode. Automatically powers down the laminator to Idle Mode after 30 minutes of inactivity and automatically shuts down the laminator after an additional 30 minutes of inactivity. Not only does this save energy and prevent wear on the laminator, but prevents safety hazards by inadvertently leaving the laminator running.
• Automatic Cooling Fans. Make laminating with film 5 mil or thicker simple without forgetting to use the fans.
• Converts to Any Power Supply. Automatically adapts to both 100-120 Volt or 200-240 Volt power supplies automatically.
• 2-year Parts and Labor Warranty.

• Automatic energy-saving and shut off modes

• Complete; no options needed

• Semi automatic tension

• Automatic safety features prevent operation until safety shield is in place

• Easy threading

• Large film capacity

• Laminates material up to 27” (70 mm) wide and1/8” (3 mm) thick using film up to 10 mil

• Automatically adapts to power supply (100-120 v AC or 200-240 v AC)

• Automatic fans

• Film supply sensor informs you when film supply is low

• Automatic warm up does not allow machine to operate until laminating temperature is reached

• USB compatible

Up to 27"

15 FPM

2.25"

1"

Up to 10 mil

6"

38"L x 23"W x 16"D

40"L x 24"W x 17"D

94 lbs.

102 lbs.

1/30 HP DC

100-120 VAX 15A
220-240 VAC 8A / 50/60 Hz

IEC-C14 (back panel)
(mates with IEC C-13 cord connector

1500 watts (2 x 750)

with 1.5 mil - 1200 ft.
with 3.0 mil - 700 ft.

2 Years parts & labor